ZEOLITI High Silica MFI, acide o basiche?

Myttex Forum ha chiuso definitivamente. Non è più possibile inviare messaggi, ma il contenuto è ancora consultabile in questo archivio.

Utente dell'ex MyttexAnswers

2014-11-09 15:39

[Attenzione! Questo thread è stato importato da Answers, non si garantisce nulla sulla correttezza, presenza e coerenza dei contenuti così com'erano su Answers!]

buonasera,

sono uno studente universitario e sono nuovo del Forum.

nei miei studi mi sono imbattuto nella Sintesi "Green" del Caprolattame messa a punto dalla Sumitomo che utilizza il riarrangiamento di Beckman e guardando la reazione che va dall'Ossima del Cicloesanone al Caprolattame ho notato che vengono usati questi catalizzatori:

HIGH SILICA MFI

se non erro questi sono delle ZEOLITI e ho cercato molto su internet ma non sono riuscito a rispondere a questa mia domanda:

SONO ZEOLITI ACIDE o BASICHE?

vi prego gentilmente di rispondere se siete a conoscienza della risposta, mi sareste molto d'aiuto.

grazie

unknown

questa è la reazione:

http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/Articleimage/2007/GC/b713736m/b713736m-f7.gif

Mario

2014-11-09 16:35

Sono acide.

In rosso la spiegazione, tratta da pag. 176 del "Chemistry of zeolites and related porous material, Di Ruren Xu,Wenqin Pang,Jihong Yu,Qisheng Huo,Jiesheng Chen"

ZSM-5 MFI is a highly porous material and throughout its structure it has an intersecting two-dimensional pore structure. ZSM-5 ha:...; two types of pores, both formed by 10-membered oxygen rings, The first type of these pores is straight and elliptical ire cross section; the second type of pores intersects the straight pores at right angles, in a zig-zag pattern and is circular in cross section, which could he described by a shorthand notation of { 1100] 10 5.1 x 5.5 [010] 10 5.3 x 5.6)"*. The unit cell of MFI structure is orthorhombic (a = 20..1, = 19..7, r = 13.1A) with Piwia symmetry_ The aluminosilicate molecular sieve (INa;(H20)161 iF r < 27) with MFI smicture could have a very high silica-to-alumina ratio. The all-silica analogue of zeolite ZSM-5, silicalite- I., can form as well. The substitution of an aluminum ion (charge 3+) for a silicon ion (charge hr) requires the additional presence of a positive charge (i.e., Fi+) to balance the negative charge of the framework_ This additional proton gives the zeolite a high level of acidity (HZSM-5), which causes its activity, The acidic catalytical activity of HZSM-5 strongly depends on the Al component in the framework. ZSM-5-type molecular sieve is one of the most important molecular sieve catalysis materials in the petroleum industry.. Like widely used LTA, FAU, and MOR molecular sieves, 7.51V1-5-rela.ted. molecular sieves h.avc been ind.ustrially prod.ucetl for long time. In the recent decade, more than 100 patents and papers related to the synthetic method and process of ZS M-5-type molecular sieve were published each year.

saluti

Mario

I seguenti utenti ringraziano Mario per questo messaggio: Utente dell'ex MyttexAnswers